MCH Konsulting Sweden
Welcome
Contact
About MCH
HAZ1508
Consultancy Services
ABACUS4
- Process Control System
- Process I/O Systems
- Networking
- Operator Interface
- Display Designer
- Engineering facilities
- Eng
- History
- Article reprints
- Downloads
- Manual (contents)
- Manual (complete)
ABACUS4 Manual
Table of Contents- ABACUS 4 - Linux
- Intended Audience
- Table of Contents
- Introduction
- Block Parameters
- Common parameters
- Process I/O
- Analogue input block (PI-Bus)
- Analogue output block (PI-Bus)
- Digital Input block
- Digital Output block
- Pulse Duration Output block
- Indata I/O block
- K48 Analogue input/output block
- N45 Module control block
- Logical Blocks
- Process Control Blocks
- Calculation Timing and type conversion
- Index Block
- Table IX1
- ab = 0 Integer addition
- ab = 1 cyclic progression
- ab = 2 Integer subtraction
- ab = 3 Integer multiplication
- ab = 4 Integer division
- ab = 5 Integer division
- ab = 6 Delay Timer
- Input Code Conversion Block
- Output Code Conversion Block
- Control Block
- Calculation and control algorithms ab 0 - 9
- List Calculation algorithms ab 10 - 13
- Accumulation algorithms ab 14 - 19
- List processing algorithms ab 20 - 25
- Cascades
- Sequence Block
- Scratchpad Block
- Operator Communications
- The ABACUS4 - Tcl/tk interface
- ABACUS 4
- System blocks, Configuration etc.
- Starting and Stopping ABACUS4
- Installing ABACUS4
- System Scratchpad Block
- Scan Control Block
- Configuration
- MODBUS Communications
- MODBUS Master
- The modbus program
- MODBUS Slave
- BSAP Communications
- The bsap2 program
- Enterprise Server Communications
- Profibus-fms
- Data Link Block
| Page updated 2008-05-12 10:38:46 by Frank McNamara (public_keys) |
.
A member of the MCH-Systems Group |